ממשק רשתות אודיו Dante

The Model 5482 is a specialized interface that allows two independent Dante^® audio-over-Ethernet networks to be interconnected. Can link up to 64 audio channels (at 48 kHz sample rate) or 32 channels (at 96 kHz sampling rate) in each direction between the two Dante networks. Can also serve as a sample-rate conversion (SRC) device to allow Dante devices with different audio sampling rates or timing references to be interconnected. Each Dante network interface features three configurable Gigabit Ethernet ports; two can be used for transporting audio and the third for accessing the management menu system. Each interface also supports AES67. Mounts in one space (1U) of a 19-inch rack and is powered by 100-240 V, 50/60 Hz. Can also be powered by an external source of 12 Vdc.

 

Network Audio Technology (each Network Interface):
Type: Dante audio-over-Ethernet
AES67-2018 Support: yes
Dante Domain Manager (DDM) Support: yes
Ethernet Interface Configuration: switched or redundant
Sample Rates: 44.1, 48, 88.2, or 96 kHz
Bit Depth: up to 24 bits
Number of Transmitter (Output) Channels: 64 (44.1 and 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
Number of Receiver (Input) Channels: 64 (44.1 and 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
Dante Audio Flows: 32 transmitter, 32 receiver

Network Interfaces: 2
Physical Ethernet Connections per Interface: 3; Dante Primary, Dante Secondary, and Management
Ethernet Connection Type: 1000BASE-T (Gigabit Ethernet ("GigE")) per IEEE 802.3ab (10 and 100 Mb/s not supported)
Ethernet Connection NIC Status LEDs: one link and one activity for each Ethernet connection

Audio Performance:
Type: fully-digital paths between network interfaces (by way of sample-rate-converter functions)
Dynamic Range: 147 dB at 48 kHz sample rate, 148 at 96 kHz sample rate, A-weighted
Distortion (THD+N): –140 dB at 48 kHz sample rate, –143 dB at 96 kHz sample rate, measured at –1 dBFS, 1 kHz
Internal Digital Audio Processing: 32 bits
Input-to-Output Audio Processing Latency:

Front-Panel LEDs: 12, dual-color
Functions: provides indication of condition of incoming AC and DC power, Dante status on each interface, and Ethernet status on each interface

Back-Panel LEDs: 14
Functions: provides status indication of both firmware update functions and six Ethernet interfaces

Power Sources:
AC Mains: 100 to 240 V, 50/60 Hz, 8 W maximum
DC: 10 to 18 V, 0.6 A max

Connectors:
Ethernet: 6, RJ45
AC Mains Input: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)
DC Input: 4-pin male XLR (pin 1 negative, pin 4 positive)
USB: 2, type A receptacle (used only for updating firmware)

Environmental:
Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)
Humidity: 5 to 95%, non-condensing
Altitude: not characterized

Dimensions:
19.0 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
8.0 inches deep (20.3 cm)

Mounting: one space (1U) in a standard 19-inch rack

Weight: 3.2 pounds (1.4 kg)